Welcome To Seismic Source Company

Seismic Source Company is a manufacturer of seismic instruments and data acquisition systems. Its products are used in a broad range of applications: Seismology, Structural Monitoring, Seismic Site Evaluation, Civil Engineering, Gas and Oil Exploration, Industrial Vibration Monitoring.


Vscope Software

 The Vscope Software program is used to operate single or multiple DAQlink Units. The Software provides full support to setup unit for autonomous or real-time operation.

Computer Requirements:

Windows 98 or newer operating system

Ethernet connection

Data Storage and Format

Vscope saves the data to network ready database

The data is stored with a date and time stamp and other setup information

Comment for each record can be entered

Database can be accessed by multiple users on the same network

SEG-Y data can be generated

SEG-2 data can be generated

ASCII data can be generated


Data can be printed using standard printer

Viewing of Data

Multiple Signal Traces can be viewed in Time domain (Normal Seismic Record). Single Traces can also be viewed

Amplitude Spectrum of whole trace or of a selected time window


Noise Analysis

Signal Comparison

Distortion Plots

Traces from different records can be overlaid for comparison

Multiple plots can be viewed simultaneously

Scaling of Seismic Plots

Fixed gain can be applied to each trace, user controls the gain of the plot

Trace Equalized Fixed Gain – Each trace has automatic gain applied to equalize them. Near traces have small gains while far traces have larger gains

AGC - Automatic Gain Control with user definable time window

Individual Trace Gains – user can select to apply user entered fixed gain to each trace.

User selectable X and Y axis for zooming in on zone of interest

Cursor can also be used to zoom in on traces

Manual First Break Picker

User can pick first breaks on Seismic Traces

User can store picks in standard file format


User can stack records that have been stored to the database

Auto Stacking function available. Program will automatically allow user to view records and determine if they should be added to the stack

Program will automatically store stacked record when stack is complete

Display Filters

User definable display filters are available

Low Cut, High Cut and Notch Filters can be enabled

User can change the filters stop band and pass band characteristics


Program can acquire data in real time to display current records

Program can download data which has been stored in the DAQlink’s Compact Flash Card

DAQlink can be set to acquire data autonomously without being connected to computer


DAQlink can be triggered automatically

DAQlink can be triggered by external source

DAQlink can trigger on specific GPS time and continue triggering on GPS time intervals

Seismic Source Co

2391 E. Coleman Rd.
Ponca City, OK 74604
Phone: (580) 762-8233
Fax: (580) 762-1785
email: This email address is being protected from spambots. You need JavaScript enabled to view it.